分類目錄

最新文章

聯系我們

One, a brief introduction
My company manufacturing FZS type organic waste gas direct-fired purification device, suitable for all kinds of organic pollutants treatment, such as big viscosity of organic pollutants, the catalytic combustion catalyst poisoning caused by pollutants, etc. Because of the direct-fired through high temperature (750 ℃ ~) incineration of organic pollutants, so FZS direct-fired can be secondary to discharge of high temperature gas recycling, reduce the cost of using this device has high removal rate, high degree of automation, etc.
Second, organic waste gas direct-fired principle of purification plant
Organic waste gas direct-fired purification device principle is: the organic waste gas heating temperature to 750 ℃ ~ 750 ℃, the high temperature oxidation of organic compounds, broken down into harmless carbon dioxide and water, etc., so that the exhaust gas purification.
Three, scope of application
Direct-fired gas processing plant is mainly used in automobile manufacturing, chemical industry, plastic printing cans, paint and other industries to produce three benzene, phenol, aldehyde, ester, ketone and other harmful waste gas (especially cathode electrophoresis organic pollutants or viscous polymer organic matter), a direct combustion process for purification treatment, in order to achieve the requirements of environmental protection.
The device can be used and heat exchanger, in order to recycle waste heat to achieve the purpose of saving energy.
Four, organic waste gas purification and direct-fired heat recycling process and device profile
1, process description,
Waste gas by the blower into the heat exchanger heat warming Ⅰ; Then into the preheating chamber heating, gas, after preheating chamber temperature to 750 ℃ ~ again into the burning chamber; Oxidation reaction in organic waste gas burning chamber into harmless carbon dioxide and water, and release the heat. After the reaction gas with large amounts of heat energy, in order to reduce the system energy consumption, after the reaction gas in turn into the heat exchanger Ⅰ Ⅱ cooling, switches, finally by induced draft fan at a lower temperature of the atmosphere. Meanwhile fresh air through the filter, heat exchanger Ⅱ heat warming by recycling the fan to need to heat equipment.
Heat exchanger Ⅱ can be used to preheat the fresh air or from the production line, such as drying furnace gas at low temperature, also can be used for other aspects of the heat energy supplies.
2, equipment, overall dimensions and technical parameters