分類目錄

最新文章

聯系我們

噴淋塔凈化設備工作原理：廢氣發作源自作業罩由排風機送入吸收塔，氣體在塔內由下向上升，一同吸收液由循環泵輸入吸收塔由上向下放射，廢氣在塔中的填料層上與吸收液逆向觸摸而發作化學反響，絕大局部被吸收；經吸收處置后的廢氣再經過氣液別離器和我公司出產的干式吸附塔吸附，這么高濃度的廢氣經吸收——吸附處置后，抵達高效凈化之企圖。凈化設備是專為處置不一樣濃度的(高可達12000Mg/m3),廢氣而規劃的，處置后呈無色氣排放，悉數契合國度廢氣排放標準，關于鹽酸、硫酸等酸性廢氣的處置作用更佳.

設備原理：關于腐蝕性氣體（如酸、堿性廢氣）的辦理，如今多選用液體吸收法辦理。選用液體吸收法辦理該廢氣，關鍵在于凈化設備的選擇。如今，我公司自立開發了凈化效率高、操作辦理簡單、運用壽命長的酸、堿性廢氣凈化技藝與設備。該技藝與商品具有結構簡單、能耗低、凈化效率高和適用范圍廣的特征，能有用去掉氯化氫氣體（HCl）、氟化氫氣體（HF）、氨氣（NH3）、硫酸霧（H2SO4）、鉻酸霧（CrO3）、氰氫酸氣體（HCN）、堿蒸氣（NaOH）、硫化氫氣體（H2S）、福爾馬林（HCHO）等水溶性氣體。酸霧廢氣由風管引進凈化塔，經過填料層，廢氣與氫氧化鈉吸收液停止氣液兩相充分觸摸吸收中和反響，酸霧廢氣經過凈化后，再經除霧板脫水除霧后由風機排入大氣。吸收液在塔底經水泵增壓后在塔頂噴淋而下，終回流至塔底循環運用。凈化后的酸霧廢氣抵達國度排放標準。

The work principle of that purification equipment of the spray tower: the exhaust gas attack originate from the operation cover which is sent into the absorption tower by the exhaust fan, the gas rises from bottom to top in the tower, and the absorption liquid is input into the absorption tower by the circulation pump to radiate from top to bottom; After the absorption and disposal of the exhaust gas through the gas-liquid separator and our company 's dry adsorption tower adsorption, such a high concentration of exhaust gas after absorption - adsorption disposal, reach the attempt of efficient purification. Purification equipment is designed for the disposal of different concentrations ( up to 12000mg / m3 ), waste gas and planning, after the disposal of colorless gas emissions, all meet the national exhaust emission standards, about hydrochloric acid, sulfuric acid and other acidic waste gas disposal effect is better.
Principle of equipment: for handling corrosive gases ( such as acid and alkaline waste gas ), liquid absorption method is often used nowadays. The choice of purification equipment is the key to the selection of liquid absorption method. Now, our company independently developed the purification efficiency is high, simple operation, long service life of acid and alkaline waste gas purification technology and equipment. The technology and the commodity have the characteristics of simple structure, low energy consumption, high purification efficiency and wide application range, and can be used for removing water-soluble gases such as hydrogen chloride gas ( HCl ), hydrogen fluoride gas ( HF ), ammonia gas ( NH3 ), sulfuric acid fog ( H2SO4 ), chromic acid fog ( cro3 ), hydrogen cyanide gas ( HCN ), alkali vapor ( NaOH ), hydrogen sulfide gas ( H2S ), formalin ( HCHO ) and the like The acid mist exhaust gas is introduced into a purification tower by an air pipe, passes through a packing layer, the exhaust gas and the sodium hydroxide absorption liquid stop gas-liquid two-phase full touch absorption and neutralization reaction, and after the acid mist exhaust gas is purified, the acid mist exhaust gas is dehydrated and demixed by a demisting plate and then discharged into the atmosphere by a fan. The absorption liquid is sprayed on the top of the tower after being pressurized by a water pump at the bottom of the tower, and finally flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas reaches the national emission standard.