分類目錄

最新文章

聯系我們

一產品簡介
     RTO，是一種高效有機廢氣治理設備。與傳統的催化燃燒、直燃式熱氧化爐（TO）相比，具有熱效率高（≥95%）、運行成本低、能處理大風量中低濃度廢氣等特點，濃度稍高時，還可進行二次余熱回收，大大降低生產運營成本。
RTO (Regenerative Thermal Oxidizer,簡稱RTO),蓄熱式氧化爐。其原理是在高溫下將廢氣中的有機物（VOCs)氧化成對應的二氧化碳和水，從而凈化廢氣，并回收廢氣分解時所釋放出來的熱量， RTO廢氣分解效率達到99%以上，熱回收效率達到95%以上。RTO主體結構由燃燒室、蓄熱室和切換閥等組成。根據客戶實際需求，選擇不同的熱能回收方式和切換閥方式。
     RTO蓄熱式焚燒是將高溫空氣噴射入爐膛，維持低氧狀態，同時將燃料輸送到氣流中，產生燃燒?？諝猓怏w燃料）溫度預熱到800℃～1000℃以上，燃燒區空氣含氧量在21%～25%，與傳統燃燒過程相比，高空氣燃燒的最大特點是節省燃料，減少CO2和NOX的排放及降低燃燒噪音，被譽為二十一世紀關鍵技術之一。

二、產品特點

   1、 較高的VOC去除率。兩床設備達95%以上，三床設備超過99%。 
   2、超低運行成本。當VOC濃度達到450ppm時，不需要額外的燃料消耗，如VOC濃度更高，還可進行二次余熱回收而大大降低生產成本。 
   3、熱效率高達95% 以上。
   4、不產生NOx等二次污染 。
   5、處理風量范圍5,000—200,000立方米/小時 。
   6、全自動控制，操作簡易，維護方便 。

三、適用領域

  1、 中、高濃度(低于20%LEL)、大風量有機廢氣 。
  2、廢氣中含有多種有機成分、或有機成分經常發生變化 。
  3、不適用于含有較多硅樹脂廢氣 。

A product introduction
RTO is a kind of high efficiency organic waste gas treatment equipment. With the traditional catalytic combustion, direct combustion type thermal oxidation furnace (TO) compared with high thermal efficiency (more than 95%), low operation cost, can handle large volume of low concentration gas, the concentration is high, but also for the two heat recovery, greatly reduce production cost.
RTO (Regenerative Thermal Oxidizer, abbreviated as RTO), regenerative oxidation furnace. The principle is to oxidize organic matter (VOCs) in the waste gas to corresponding carbon dioxide and water at high temperature, so as to purify exhaust gas and recover the heat released from decomposition of waste gas. The efficiency of RTO waste gas decomposition is over 99%, and the heat recovery efficiency is over 95%. The main structure of the RTO is composed of the combustion chamber, the regenerator and the switching valve. According to the actual needs of the customers, different heat recovery methods and switching valves are selected.
The RTO regenerative incineration is to spray high temperature air into the furnace and maintain low oxygen state. Meanwhile, the fuel is transported to the air to produce combustion. The air (gas) preheating temperature above 800 DEG to 1000 deg. the oxygen in the air in the combustion zone from 21% to 25%, compared with the traditional combustion process, the biggest characteristic of high air combustion is to save fuel, reduce CO2 and NOX emissions and reduce combustion noise, known as one of the key technologies in twenty-first Century.

Two, product characteristics

1, high VOC removal rate. Two beds are more than 95%, and three beds are over 99%.
2, ultra low operating cost. When the concentration of VOC reaches 450ppm, no additional fuel consumption is needed, such as the higher concentration of VOC, and two waste heat recovery can be carried out to greatly reduce the production cost.
3, the thermal efficiency is above 95%.
4, it does not produce two pollution such as NOx.
5. The air volume range is 5000 - 200000 cubic meters per hour.
6, automatic control, easy to operate, easy to maintain.

Three, applicable field

1, medium, high concentration (less than 20%LEL), large air volume of organic waste gas.
2, a variety of organic components, or organic components are often changed in the exhaust gas.
3. It is not applicable to the waste gas containing more silicon resin.